Holding And Positioning Welding Gun

Holding And Positioning Welding Gun

_ Welding wire is energized when gun trigger is pressed. Before lowering helmet and pressing trigger, be sure wire is no more than 1/2 in. (13 mm) past end of nozzle, and tip of wire is positioned correctly on seam.

1 Hold Gun And Control Gun Trigger

2 Workpiece

3 Work Clamp

4 Electrode Extension (Stickout) 1/4 To 1/2 in. (6 To 13 mm)

5 Cradle Gun And Rest Hand On Workpiece

Groove Welds

6 End View Of Work Angle

7 Side View Of Gun Angle

Fillet Welds

8 End View Of Work Angle

9 Side View Of Gun Angle
<< PREVIEW                       NEXT >>

sumber : http://www.millerwelds.com